Handleiding
Je bekijkt pagina 26 van 32
26 OCI603KZCOMUser Manual
Specific Failure & Solution
Failure Problem Solution A Solution B
The LED does not come on
when unit is plugged in.
No power supplied.
Check to see if plug is
secured tightly in outlet and
that outlet is working.
The accessorial power
board and the display board
connected failure.
Check the connection.
The accessorial power board
is damaged.
Replace the accessorial
power board.
The display board
is damaged.
Replace the display board.
Some buttons can’t work, or
the LED display is not normal.
The display board is
damaged.
Replace the display board.
The Cooking Mode Indicator
comes on, but heating does
not start.
High temperature of the hob.
Ambient temperature may
be too high. Air Intake or Air
Vent may be blocked.
There is something wrong
with the fan.
Check whether the fan runs
smoothly if not , replace the
fan.
The power board is damaged. Replace the power board.
Heating stops suddenly during
operation and the display
flashes “u”.
Pan Type is wrong.
Use the proper pot (refer to
the instruction manual.)
Pan detection circuit is
damaged, replace the
power board.
Pot diameter is too small.
Cooker has overheated;
Unit is overheated. Wait for
temperature to return
to normal.
Push “ON/OFF” button to
restart unit.
Heating zones of the same
side ( Such as the first and the
second zone ) would display
“u” .
The power board and the
display board connected
failure;
Check the connection.
The display board of
communicate part is
damaged.
Replace the display board.
The Main board is damaged. Replace the power board.
Fan motor sounds abnormal. The fan motor is damaged. Replace the fan.
Troubleshooting
Bekijk gratis de handleiding van Omega OCI603KZCOM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Omega |
| Model | OCI603KZCOM |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2450 MB |
