Olimpia Splendid Dolceclima Slim 8 handleiding

Airco

Olimpia Splendid

354 pagina's

PDF beschikbaar

Handleiding

/ 354

Je bekijkt pagina 48 van 354

EN - 16

ENGLISH

b. This mode is similar to cooling mode, except that:

fan speed selection not active (Set temperature) set equal to “Tamb” (ambient temperature).

c. In dehumidication mode only, the appliance can operate with only the condensate drain pipe connected

(12) and without the exible air expulsion hose.

3.8 - AUTO MODE (Automatic)

a. This mode can be selected by pressing B2 or SW2 until the automatic symbol (AUTO/ D2) is displayed

on the remote control.

b. In this mode, the COOLING and FAN functions are selected automatically depending on the continuously

monitored room temperature value to ensure that there is a perfect comfort-level in the conditioned room.

3.9 - NIGHT FUNCTION

a. This mode can only be selected from the remote controller by pressing the B4 key, the symbol D11 appears

on the display; this mode can only be used combined with cooling and automatic modes.

b. When this mode is enabled, the internal fan is forced to run at automatic speed and the set room temper-

ature is automatically increased by 1°C after 1/2 hour and by another 1°C again after 1/2 hour (starting

from function activation and consequent modication of the set temperature).

c. After 7 hours the initial temperature is automatically restored.

d. When the set temperature is modied from the remote control, when the appliance is placed in standby,

or when the power supply is disconnected, the night function is disabled.

e. To deactivate the function press the B4 button again.

3.10 - TIMER MODE

a. This mode allows to program the switching on or the switching off of the appliance.

b. The delay time can be set by the remote control.

3.10.a - Programmed switching on

Select the operating mode, the desired temperature and the ventilation speed with which the unit will

activate automatically as programmed.

a. By pressing B9, set the desired time delay (from 0.5 to 24 hours) after which the unit will switch ON (starting

from timer conrmation).

If no button is pressed within 5 seconds the timer setting function will terminate automatically.

b. When the delay time set has elapsed, the unit switches ON with latest selected settings.

c. To cancel the delayed power-on, press button B9 again until a value of 0 is set.

d. When the timer is active, the symbol D14 lights up on the remote control, while, for the models without

Wi-Fi, the LED S2 lights up.

3.10.b-Programmedswitchingo󰀨

a. With the unit in any working mode, press B8 to set the desired time delay (from 0.5 to 24 hours) after

which the unit will switch OFF (starting from timer conrmation).

Each following B8 key operation increases the delay time value by 1 hour.

b. If no button is pressed within 5 seconds the timer setting function will terminate automatically.

When the delay time set has elapsed, the overall unit switches OFF.

c. To cancel the delayed shutdown, press button B8 again until a value of 0 is set.

d. When the timer is active, the symbol D13 lights up on the remote control, while, for the models without

Wi-Fi, the LED S2 lights up.

3.11 - SETTING THE UNIT OF MEASUREMENT OF TEMPERATURE

On pressing buttons SW3 SW4 simultaneously for 3 seconds you can change the temperature unit of

measure indicated on the machine display from CELSIUS (°C) to FAHRENHEIT (F) and vice versa.

/ 354

Bekijk gratis de handleiding van Olimpia Splendid Dolceclima Slim 8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.