Olimpia Splendid Dolceclima Slim 8 handleiding

Airco

Olimpia Splendid

354 pagina's

PDF beschikbaar

Handleiding

/ 354

Je bekijkt pagina 47 van 354

DOLCECLIMA COMPACT S & DOLCECLIMA SLIM

EN - 15

ENGLISH

3.4 - USE OF THE APPLIANCE

Work as follows in order to use the appliance.

To prevent possible damages to the compressor, each start is delayed by 3 minutes with

respecttothelastswitchingo.

3.4.a - Preliminary operations

• Placetheapplianceonastableandnotinclinedbase,atatleast30cm.fromthewall

orfromanyotherobject,inordertoensurethecorrectaircirculation.Placeitona

water-resistant surface since the possible water leakage could damage furniture or

theoor.

• Do not place the appliance directly on carpets, towels, blankets or other absorbent

surfaces.

• Insert the plug in the power socket; the appliance emits a “beep”, on the display

appears the icon

and the environment temperature in °C.

Before electrically connecting the appliance, make sure the plate data correspond to

those of the electricity distribution network.

3.4.b-Applianceswitchingon/o󰀨

a. The appliance can be switched ON or OFF for short periods by pressing B1 on the remote control or

SW1 on the control panel (if the appliance is switched off for a long period then it should be deactivated

by removing the plug from the mains supply.

b. The corresponding LED L2 lights up to indicate that the appliance is switched off.

c. In this condition, press B1 again on the remote control (or SW1 on the control panel) to restore all the

formerly selected functions.

When the appliance is OFF all the working timers are ‘reset’.

3.5 - VENTILATION MODE (FAN)

a. When this operating mode is used the appliance has no effect on the temperature or humidity of the

environment, it merely circulates the air.

b. This mode can be selected by pressing B3 or SW2 until when the fan only symbol ( ) is activated on the

display of the control panel, while the symbol D6 appears on the remote controller display.

c. In this operating mode, the internal fan is always on and it is possible to select its desired speed (auto,

low, high) at any moment by pressing the specic key B3 or SW6 until when the corresponding led is

activated on the display of the control panel, while on the remote controller display appears the symbol

D7.

3.6 - COOLING MODE (COOL)

a. In this mode the appliance cools and dehumidies the environment.

This mode can be selected by pressing B2 or SW2 until the cooling only symbol

( / D3) is activated on the remote control and on the control panel display.

b. The internal fan is always on at automatic speed or (only from the remote control) at the selected speed.

c. The temperature set-point (Tset) can be adjusted from 17°C to 30°C (from 62 F to 86 F if present) in

1°C steps by means of B11 or SW3/SW4, and its value is shown both on remote and local interfaces.

d. Three minutes (maximum) after the activation of this operating mode the compressor starts and the ap-

pliance starts to distribute cold air.

3.7 - DEHUMIDIFICATION MODE (DRY)

a. This mode can be selected by pressing B2 or SW2 until the dehumidication only symbol ( / D4) is ac-

tivated on the remote control and on the control panel display.

/ 354

Bekijk gratis de handleiding van Olimpia Splendid Dolceclima Slim 8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.