Handleiding
Je bekijkt pagina 25 van 438
Preparations and connecting this machine to your PC
- 25 -
Refer to the next section for the procedure for connecting via a wireless LAN.
Connection form via a wireless LAN(P.45)
Connecting via an access point (Infrastructure)(P.46)
Connecting directly with this machine (Wi-Fi Direct)(P.58)
Installing the expansion tray unit
Injury may be caused.
The machine may tip over. Be sure to attach the supplied connecting parts.
Install the expansion tray unit if you want to increase the amount of paper that can be loaded. After
installation, set the number of trays in the printer driver.
Up to 3 expansion tray units can be installed. Be sure to attach the supplied connecting parts.
To install 2 or more expansion trays, install the optional dedicated caster stand and set the anti-tip feet to
avoid the risk of tipping.
To install this machine on a table, it is recommended to install one expansion tray.
Installing the dedicated caster stand(P.27)
A flat-head screwdriver is required to install the expansion tray unit.
ļ The packing case and cushioning materials are required to ship the expansion tray unit. Keep them properly instead
of discarding them.
ļ When an extension tray is used to print from, if the printing position shifts, the printing position is corrected for each
extension tray. For details, see "Correcting the print position of the tray(P.186)".
This section takes for an example the case where one expansion tray unit is installed in B433.
1
Check that you have all the parts of the expansion tray unit.
Expansion tray unit
Connecting parts (x2)
Screws (x2)
2
Press the power button to power off the main unit, and disconnect the power cord and any other
cables.
Be sure to turn off the power supply, disconnect the power cord and any other cables, and then install the
expansion tray unit. If you install the expansion tray unit while the power supply is on, this machine and the
expansion tray unit may break down.
If you install it with any cable connected, you may get injured by getting your feet trapped by the cable.
3
Install the first expansion tray unit.
Bekijk gratis de handleiding van Oki B513dn, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oki |
| Model | B513dn |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 73129 MB |
