Handleiding
Je bekijkt pagina 99 van 438
Changing settings from the operator panel
- 99 -
6
Press ▲ or ▼ to select the time to be set, and then press «OK». Check that [*] is displayed to
the left of the selected setting.
7
Press «CANCEL» to return to the standby screen.
Setting the time that elapses before entering the sleep mode
This machine automatically enters the sleep mode (a more energy saving mode) if no operation is done for a
certain period of time in the power save mode.
The following time options can be set. The factory default setting is 1 minute.
1 minute, 2 minutes, 3 minutes, 4 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, and 60 minutes
When an error has occurred, this machine will not enter the sleep mode.
This machine may not enter the sleep mode after the set period of time since the fan is working until this machine
has cooled down depending on the printing environment or the usage conditions.
1
Check that "Ready To Print" appears on the display.
If the machine is in the power save mode, press «OK» to restore.
2
Press the scroll button ▼ on the operator panel to select [Menus], and then press «OK».
3
Press ▼ several times to select [User Setup], and press «OK».
4
Press ▼ to select [System Adjust], and then press «OK».
5
Press ▼ to select [Sleep Time], and then press «OK».
Bekijk gratis de handleiding van Oki B433dn, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oki |
| Model | B433dn |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 73133 MB |
