Handleiding
Je bekijkt pagina 126 van 438
Changing settings from the operator panel
- 126 -
Boot Menu
While holding «OK» on the operator panel, press the power button. When [Boot Menu] appears on the
display, release your finger and press «OK» again.
Press the scroll button ▲ or ▼ to input the admin password, and then press «OK».
Administrator Password(P.195)
This menu operation requires a restart.
Item
Factory
default
setting
Description
Enter Password (Please refer
to the
password
label
attached on
the inside of
this
machine.)
Input the admin password required to enter the Boot Menu.
Menu Lockout Off When [On] is set, the Admin Setup and user menu list are
hidden and thus unavailable. However, only printing
settings are displayed.
Panel Lockout Off Disable the buttons on the operator panel.
[Mode1]: Enable «OK», «CANCEL», «HELP» and
«BACK»; and disable ▲ and ▼.
[Mode2]: Disable all the buttons except «OK», «HELP» and
«BACK».
[Off]: All the buttons can be used.
After AC power supply fails Always Off Set whether or not to restore the Ready-To-Print status
automatically in case of a power failure.
Depending on the action mode of the machine, if the power
cord is unplugged or power supply is interrupted (e.g. due
to a power failure), the machine may not start by force
unless a specified period of time has elapsed before the
power cord is reconnected. (5 minutes in Japan, 6 minutes
in Taiwan, and 8 minutes in other countries or regions
except Japan and Taiwan)
[Always On]: This machine is started by force when the
power failure is recovered without pressing the power
button. This machine starts simply by connecting the power
plug to the outlet.
[Always Off]: This machine does not start when the power
failure is recovered without pressing the power button.
[Last State]: This machine remembers the state when the
power supply is interrupted and restarts with that state after
the power failure is recovered. This machine automatically
restores the Ready-to-Print state when the power failure is
recovered even if the power supply is interrupted due to a
power failure while the machine is working. If a power
failure occurs when the power is off, this machine does not
start even after the power failure is recovered.
Bekijk gratis de handleiding van Oki B433dn, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oki |
| Model | B433dn |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 73133 MB |
