Handleiding
Je bekijkt pagina 101 van 438
Changing settings from the operator panel
- 101 -
4
Press ▲ or ▼ to input the admin password, and press «OK».
Administrator Password(P.195)
5
Press ▼ several times to select [Power Setup], and then press «OK».
6
Press ▼ several times to select [Auto Power Off], and then press «OK».
7
When "Changing this setting may increase energy consumption." is displayed, press «OK».
8
Press ▲ or ▼ to select [Auto Config], [Enable] or [Disable], and press «OK». Check that [*] is
displayed to the left of the selected setting.
9
Press «CANCEL» to return to the standby screen.
Setting the time that elapses before entering the Auto Power Off mode
The following time options can be set. The factory default is 15 minutes or 4 hours depending on region.
15 minutes, 1 hour, 2 hours, 3 hours, 4 hours, 8 hours, 12 hours, 18 hours, and 24 hours
1
Check that "Ready To Print" appears on the display.
If the machine is in the power save mode, press «OK» to restore.
Bekijk gratis de handleiding van Oki B433dn, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oki |
| Model | B433dn |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 73133 MB |
