Handleiding
Je bekijkt pagina 37 van 55
Before using your new induction cooking hob
• Read this guide, paying special attention to the “saf
ety instructions”.
• Remove any protective film remaining on your induction cooking hob.
Use of setting controls
• The setting controls respond to the touch, so there is no need to
press.
• Use the round end of your finger, not its tip.
• You hear a beep each time a touch is registered.
• Ensure the setting controls are always clean and dry and no object
(e.g. a utensil or cloth) is on the top. Even a thin film of water may
make the setting controls difficult to operate.
Selecting the right cooking utensil
Use only cooking utensils with a base suitable for induction.
Look for the induction symbol on the packaging or on the
bo
ttom of the pot.
• You can check if your pan is suitable by doing a magnet
test. Drag a magnet over the bottom of the pot. If it is
attracted, the pot is suited to induction.
• If you do not have a magnet:
1. Put a little water in the pot you wish to check.
2. If X does not flash on the control panel and the water is heating up, the pot
is suitable.
• Cookin
g
pans made of the following materials are not suitable: pure non-oxidising
steel, aluminium or copper without magnetic base, glass, wood, porcelain, ceramic and
earthenware.
Do not use cooking
pans with jagged edges or curved base.
EN - 09
Bekijk gratis de handleiding van Oceanic OCEATI2Z2B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oceanic |
| Model | OCEATI2Z2B |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4355 MB |
