Obsidian Netron RDM10 handleiding
Handleiding
Je bekijkt pagina 17 van 45
17
MENU: CUES
A cue is a full static snapshot of all DMX values of all ports. The
device supports 99 cues with fade and hold times, plus a link
option to loop multiple cues together. This allows small “mini”
cuelists to be created. Cues are used for standalone operation,
as a backup for signal loss or can be assigned to one of the
switch inputs. This is often used for fire alarm situations where a
system must go to a defined state and stop all console playback.
Cues can be sent as Ethernet Universes so one device can drive
many other Netron devices.
Run Cue
1-99
Select the desired cue
Save Cue
1-99
Save all values on all ports to a cue slot
Rename Cue
Edit name of cue
Link Cue
Fade Time
Set the fade time of the cue
Hold Time
Set the time to hold the cue until the next cue is started
Link to Cue
Set the next Cue
Resend Ethernet
Disable
Cue data is not sent over Ethernet
Enable
Cue data is sent on the Universe number and protocol
assigned to the ports.
SUB MENU
OPTIONS / VALUES
DESCRIPTION
Run Cue
1 – 99
Go/Off
Select the desired cue
Save Cue
1:Cue 1
…
99:Cue 99
Save Cue?
Yes/No
Save all values on all ports to a cue slot
Rename Cue
1 – 99
12 Character Label
Edit name of cue
Link Cues
1 – 99
Fade Time
0s – 60min
Set the fade time of the cue
Hold Time
0s – 60min
Set the time to hold the cue until the next cue is
started
Link to Cue
Disable, 1 – 99
Set the next Cue
Resend Ethernet
Disable
Cue data is not sent over Ethernet
Enable
Cue data is sent on the Universe number and protocol
assigned to the ports.
Bekijk gratis de handleiding van Obsidian Netron RDM10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Obsidian |
| Model | Netron RDM10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10752 MB |
