Nubert nuConnect trX handleiding

Handleiding

123456789101112131415161718192021222324/ 24

Afdrukken

Je bekijkt pagina 17 van 24

nuConnect trX 17 07/2020 EN

Connecting a non-wireless subwoofer

wirelessly to nuPro X-series speakers

Devices Transmitter: nuPro X-4000

(examples) Receiver: nuConnect trX w. nuVero AW-17 subwoofer

You can use the trX to add wireless connectivity to a subwoofer without a built-in

wireless receiver.

• Connect the trX to the line input of your subwoofer.

• Configure the trX as a receiver (Line Out, yellow LED) and pair it with your

nuPro X master speaker.

Note:

– The nuPro X stereo-pair must be connected wirelessly.

– The trX receives an unfiltered full-range signal, the crossover (lowpass-) fre-

quency of the subwoofer must be set on the subwoofer itself. The crossover

frequency (highpass) of the nuPro speakers must be set on the master speaker

in the System HP menu.

Connecting non-wireless active speakers

wirelessly to the nuConnect ampX

Devices Transmitter: nuConnect ampX

(examples) Receiver: nuConnect trX w. nuPro A-700

You can use the trX to add wireless connectivity to active speakers without a

built-in wireless receiver.

• Connect the Line Out of the trX to the AUX In of the nuPro A-700.

• Configure the trX as a receiver (Line Out,

yellow LED) and pair it with your

nuConnect ampX

Note:

– You can use the Power Port of the A-700 to power the trX.

– The nuConnect ampX must be configured as wls master. You can use any

nuPro X- or XS-series speaker as a transmitter instead of the ampX.

– You can use the trX with any active speaker with an analogue line input

123456789101112131415161718192021222324/ 24

Bekijk gratis de handleiding van Nubert nuConnect trX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd