NovaStar H5 handleiding
Handleiding
Je bekijkt pagina 5 van 95
H Series Video Wall Splicers User Manual
www.novastar.tech
2
Figure 1-2 LED 4K sending card connection
Note:
The H_20xRJ45 sending card is connected and configured in the same way as the H_16xRJ45+2xfiber
sending card.
When the video output card is used for output, the LED screen can be loaded by the sending device and
the LCD screen can be loaded directly.
Via Ethernet cable
To load the LED screen, connect the output card connectors to the input connectors of the sending
device, and connect the sending device to the LED screen via Ethernet cables, as well as configure
the screen on the sending device.
Via video cable
To load the LCD screen, connect the output card connectors to input connectors of the LCD
splicing screen via video cables.
Figure 1-3 Video output card connection
Power Supply
Connect the power connector on the rear panel to the electrical outlet using the supplied power cord.
Bekijk gratis de handleiding van NovaStar H5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | NovaStar |
| Model | H5 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17657 MB |
