NordicTrack X16 handleiding
Handleiding
Je bekijkt pagina 7 van 36
7
• Assembly requires two or three persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you nish all assembly steps.
• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
• To identify small parts, see page 6.
• Assembly can be completed using the included
tools. Note: Your own rubber mallet may also be
helpful; however, be careful to not break plastic
parts with the rubber mallet.
ASSEMBLY
3
130
53
53
133
2. Attach a Wheel (53) to the Stabilizer (3) with an
M10 x 70mm Bolt (130) and an M10 Locknut
(133); do not overtighten the Locknut; the
Wheel should turn freely.
Attach the other Wheel (53) in the same way.
2
1
1. To register your product and activate your
warranty in the UK, go to iFITsupport.eu. If you
do not have internet access, complete the war-
ranty registration card in the warranty booklet
and send it by registered post to the address on
the back cover of the warranty booklet.
To register your product and activate your
warranty in Australia, email or post the
following information to the email address or
postal address on the front cover of this manual.
• your receipt (make sure to keep a copy)
• your name, address, and telephone number
• the model number, serial number, and name
of your product (see the front cover of this
manual)
Bekijk gratis de handleiding van NordicTrack X16, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | NordicTrack |
| Model | X16 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4716 MB |