NordicTrack X16 handleiding
Handleiding
Je bekijkt pagina 10 van 36
10
141
141
57
50
7
8
24
25
14
17
16
17
40
40
44
45
44
119
119
8. See the inset drawing. Identify the Right
Handlebar (17), a Handlebar Cover (40), and the
Right Rear Leg Cover (44). Slide the Handlebar
Cover and the Right Rear Leg Cover onto the
Right Handlebar.
While a second person holds the Right
Handlebar (17) in the position shown, con-
nect the Right Control Wire (50) to the Control
Extension Wire (57). IMPORTANT: The wire
connectors should slide together easily and
snap into place with an audible click. You
must connect the wires properly for your
elliptical to function properly.
Avoid pinching the wires. Insert the Right
Handlebar (17) into the Right Pivot Leg (13),
and attach it with two M10 x 42mm Bolts (119);
firmly tighten the Bolts.
Then, press the Right Rear Leg Cover (44) onto
the Right Front Leg Cover (45), and insert the
connectors on the Wires (50, 57) into the
Covers. Then, slide the Handlebar Cover (40)
into place.
Repeat this step for the Left Handlebar (16).
7. Identify a Left Rear Belt Cover (24) and a Right
Rear Belt Cover (25). Attach these parts to the
Left Pedal Arm (14) with five M4 x 16mm Screws
(141); start all five Screws, and then tighten
them.
Repeat this step on the right side of the
elliptical.
Do not pinch
the wires
13
Bekijk gratis de handleiding van NordicTrack X16, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | NordicTrack |
| Model | X16 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4716 MB |