Nord Stage 4 handleiding
Handleiding
Je bekijkt pagina 12 van 76
12 | NORD STAGE 4 USER MANUAL OS V1.4X
BUTTONS
Selector buttons are used for selecting a setting in
an array. They have a set of round or triangular LEDs
to indicate its current setting. Press the button
several times to cycle through the possible options.
ON buttons are used for activating a function or a
group of functions such as effects and have a LED
close to them to indicate the on/off status.
Synth Function buttons – indicated with a red
frame – such as those for all envelopes, utilize the
Synth Section display and its three dials for making
settings.
THE SHIFT BUTTON
Many panel controls on the Nord Stage 4 have a secondary
function, which is printed immediately below it. These
additional functions are accessed by pressing and holding
SHIFT while operating the control.
The Shift button is also used to EXIT a menu or to cancel an
ongoing Store operation.
HOLD TO SHIFT FUNCTION
Most Shift functions on the panel can also be activated
by pressing down the button for a short while. This
functionality is indicated by a non-filled arrow ( )next to
the button text.
BUTTON HOLD AND DOUBLE TAP FUNCTIONS
Some buttons, such as that for the Master Clock, can be
held down in order to access a function or make
additional settings, indicated by the text being accompa-
nied by a down arrow ( ).
Button texts with double arrows ( ), such as those for
Section Edit and Morph Assign, can be double tapped in
order to keep the function in its active state, without
having to keep the button pressed down manually. This
is sometimes referred to as “latch” or “sticky” mode, which can be
exited by either pressing again on the button or on Shift/Exit.
LIST VIEW
Any dial that has LIST written below it - such as the Program dial - can
be used to access a useful list view.
1 Press SHIFT and turn the PROGRAM dial to enter a list view of all
the Programs.
2 Browse to a Program in any of the 8 banks, using the PROGRAM
dial.
3 Press SHIFT again to EXIT the List view.
l List views for the Piano, Preset Library and Waveform dials function
in just the same way.
PROGRAM VIEW MODES
The PROG VIEW (Program View) button lets you select between three
distinct modes for what is shown in the Program display, providing more
or less information as needed or desired.
Press the Prog View button to try out each of the modes:
1 The first view mode shows only the Bank letter and Program
number, as well as the Program name. The lower half of the display
is reserved for parameter hints, shown when operating a panel
control.
2 The second view mode shows the same info as the first mode,
but adds rows for the Organ, Piano and Synth Sections where
information about what is loaded in the currently focused Layers is
shown.
3 The third view mode shows information about all Layers, with the
Program name and location in smaller print at the top of the display.
EDIT A PROGRAM
Editing a program is as easy as turning a knob or pressing a button, to
change an existing setting. Let’s give it a quick try:
1 Select Program A:21 (a piano based program) for this exercise.
The controls for the Piano Section are located immediately to the left
of the Program area on the panel. Depending on Prog View mode (see
above) the Program area display shows the name of the selected piano
sound, and the six-way PIANO SELECT indicator is set to Grand.
SELECT A NEW PIANO SOUND
2 Turn the PIANO SELECT dial to browse the piano sounds. To switch
between sounds of different type (Grand, Upright, Electric Piano
etc.) use the TYPE button.
Program Piano
CatAbc
Num
A:13 Horizon Whl
A:14 Felt Upright
A:15 Oo Pad Whl
A:16 Silk Pad
Bekijk gratis de handleiding van Nord Stage 4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Stage 4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10906 MB |
