Nord Organ 3 handleiding
Handleiding
Je bekijkt pagina 29 van 40
10. MENUS | 29
i Use the L+R Out setting for determining whether the sound that is
sent to the Ext Outputs also appears on the Left/Right outputs or
not.
3 - AUX OUT
These options provide a range of useful configurations using the Aux
(Auxilliary) Output. If nothing is connected to the Aux output, this is
indicated by the “Aux: Not connected” text in the display.
Clean Copy: Provides the clean/dry signal before the Rotary Speaker. If
Bass Pedals are set to FX/Rotor Bypass, those are summed to both the
L/R and Aux outputs.
Vx/Farf: Allows for sending the Vx/Farf organ models to the Aux output.
All effects, including Amp model or Rotary Speaker are bypassed.
Bass Pedal: In this mode the bass pedals are sent to the Aux output.
All effects, including Rotary Speaker are bypassed.
Rotary Bass: With this setting, the bass rotor part of the Rotary
Speaker signal is sent to the Aux Output, with the treble horn signal
being sent to the Left and Right outputs. If the Rotary Speaker is off,
nothing is sent to the Aux output.
Range: Clean Copy (default), Vx/Farf, Bass Pedal, Rotary Bass
i Use the L+R Out setting for determining whether the sound that is
sent to the Aux Output also appears on the Left/Right outputs or
not.
PAGE 4 - SUSTAIN PEDAL
1 - TYPE
This selects the type of pedal connected to the SUSTAIN PEDAL jack.
The sustain pedal controls sustain for both the Upper and Lower
manuals, as well as the Bass Pedals.
Range: Nord SP-1 (Default), Nord SP-2, Nord TP-1, (Normally)
Open, (Normally) Closed
i If no pedal is connected to the Sustain Pedal jack, this is indicated
by the “Not connected” text at the bottom of the display.
PAGE 5 - SWELL PEDAL
1 - TYPE
This setting configures a pedal attached to the SWELL PEDAL jack.
The indicator at the bottom of the display shows the current value for a
connected Swell Pedal, and can be used for determining that the pedal
is functioning correctly.
Range: Nord EP (EP15, EP30, default), Roland EV7, Yamaha FC7,
Korg, Fatar SL (Studiologic)
2 - GAIN
If the attached pedal does not reach 100% (indicated at the bottom
of the display) the Gain parameter can be used for boosting the Swell
Pedal signal.
Range: 1(default)-10
i If no pedal is connected to the Swell Pedal jack, this is indicated
by the “Not connected” text at the bottom of the display. When a
pedal is connected, a percentage is shown indicating the current
Swell amount produced by the pedal.
PAGE 6 - ROTARY CTRL
1 - TYPE
This setting allows for changing the type/polarity of a switch pedal
connected to control ROTARY CONTROL input. If using the optional Half
Moon Switch, make sure that the Half Moon setting is selected.
The indicator at the bottom of the display shows the current setting for a
connected Half Moon Switch (Left/Slow, Center/Stop, Right/Fast) or the
current state of a connected switch pedal.
Range: Half Moon, Nord SP-1 (Default), (Normally) Open, (Normally)
Closed
2 - PEDAL MODE
This allows for changing the functionality of a switch pedal connected
to the ROTARY CONTROL input on the Nord Organ 3. Use the Slow and
Stop buttons on the panel to determine whether the pedal should switch
between Fast and Slow or Fast and Stop.
i This setting has no impact on the behaviour of a connected Half
Moon Switch
With Toggle selected, the rotor speed is switched with each press on
the pedal, like an on/off switch pedal. When set to Hold, the Rotor
Speed is Fast for as long as the pedal is pressed and reverts back to
Slow or Stop when the pedal is released.
Range: Toggle (default), Hold
PAGE 7 - MIDI CHANNELS
1 - LOCAL CONTROL
MIDI Local Control determines if the Nord Organ 3 manuals and control
panel will address the internal sound engine and programs, or only
transmit MIDI. Local Control On is the normal “playing mode”. When
Local Control is in Off mode, panel and keyboard actions are transmitted
via MIDI only.
Range: On (Default), Off
i Local Control always reverts to “On” every time the Nord Organ 3
is powered on
2 - CHANNEL UPPER
This sets the MIDI Channel that the Upper manual on the Nord Organ 3
transmits and responds to.
Range: Off, 1-16 (default = 1)
3 - CHANNEL LOWER
This sets the MIDI Channel that the Lower manual on the Nord Organ 3
transmits and responds to.
Range: Off, 1-16 (default = 2)
4 - CHANNEL BASS
This sets the MIDI channel that the Bass Pedal section of the Nord
Organ 3 transmits (if the To Lower function is active) and responds to.
Range: Off, 1-16, (default = 3)
Bekijk gratis de handleiding van Nord Organ 3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Organ 3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4761 MB |
