Nord Organ 3 handleiding
Handleiding
Je bekijkt pagina 21 van 40
6. PROGRAM | 21
LIVE PROGRAMS
The Nord Organ 3 has three easy-to-access Live programs, selectable
with the LIVE 1-3 buttons. These programs are special in that edits to
them are automatically stored. When exiting a Live program or powering
off the machine all edits are saved, without the need for a manual Store
operation.
A Live program can be stored to a location in the program banks using
the standard Store methods (see next page). Conversely, a regular
program can also be stored into a Live program location.
SYSTEM AND SOUND MENUS
Press SYSTEM (Shift+Live 1) or SOUND (Shift+Live 3) to enter the
System or Sound menu respectively.
The System menu contains settings concerning MIDI, pedals, global
transposition functionality, output routing options and more, whereas the
Sound menu contains settings relating to the B3 Organ, Rotary Speaker
and Bass presets.
To read more about menus and all available settings, turn to page 28.
STORE
The STORE button is used for storing an edited program
to a location in the program banks. Storing a program
overwrites existing data at the selected memory location.
i When the Nord Organ 3 is shipped from factory
its memory is protected. To be able to store Programs the
Memory Protect parameter needs to be set to “Off” in the
System menu. Read more about this on page 29.
STORING A PROGRAM
Here is how to store a program without changing its name:
1 Press the STORE button once. The Store LED will start blinking,
and the display will show the name of the program and its location.
2 To select a different store location use the dial and/or the PROG/
PAGE 3/4 and BANK 3/4 buttons. A program can also be
stored to one of the Live program locations by pressing any of the
LIVE 1-3 locations, during the Store process.
l The program at the selected destination can be auditioned during
the Store process by playing the keyboard.
i To cancel an ongoing Store operation, press EXIT.
3 When a suitable location has been selected, press STORE again to
confirm the operation.
NAMING A PROGRAM (STORE AS...)
1 To store and name your program press STORE AS... (Shift + Store).
2 Press the Abc soft button to bring up a row of alphanumeric
characters. Use the dial to set the character for the current
position. Release the Abc button to advance to the next character.
The dial can be used to move the cursor freely. Use the Del soft
button for deleting the selected character.
3 Press STORE to bring up the Store Program To screen. Use the dial
and/or the PAGE/BANK buttons to select a location.
4 When a suitable location has been selected, press STORE again.
i The program is automatically assigned a category based on the
selected Organ Model.
l Naming programs can also be done with the Nord Sound Manager.
TRANSPOSE ON/SET
The Nord Organ 3 can be transposed in +6/-6 semitone
steps on a per-program basis. To set the transpose
value, press and hold down ON/SET and then use the
dial to choose a setting.
A quick press on the ON/SET button turns the function On or Off.
Transpose settings are saved and recalled as part of a program.
l To set up a transpose that affects all programs, use the Global
Transpose parameter in the System Menu
BASS PEDAL AND MIDI LEDS
The BASS PEDAL and MIDI LEDs, located above the
Transpose control, blink as incoming MIDI messages
are received by the Bass Pedal or MIDI In ports
respectively. The MIDI LED also indicates when MIDI is received over the
USB connection.
STORE
A:01
B3 Panel
As: B3 Panel
STORE AS...
B3 Panel
rstuvxyzABCDEFGHIJKL
ABC
Del
Bekijk gratis de handleiding van Nord Organ 3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Organ 3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4761 MB |
