Nord Organ 3 handleiding
Handleiding
Je bekijkt pagina 20 van 40
20 | NORD ORGAN 3 USER MANUAL OS V1.0X
6
PROGRAM
The centrally located PROGRAM section provides access to
performance functions such as loading and storing programs, access
to Live programs, Transpose functionality and more. This is also where
menus containing System and Sound settings are found. The menus
and their settings are covered in a separate chapter, starting on page
29.
SHIFT/EXIT BUTTON
Many controls have a secondary function which is accessed
by holding SHIFT and pressing the button or turning the dial.
Shift functions are always printed below the corresponding
control. For example, holding Shift and pressing the Live 3
button will open up the Sound Menu. The Shift button is also
used to EXIT menus, or for cancelling Store operations.
l Most of the shift functions on the panel can also be accessed by
pressing down its associated button for a short period of time.
PROGRAM
WHAT IS A PROGRAM?
A Program on the Nord Organ 3 contains all panel settings including
Organ and Bass Model, drawbar settings for Upper B, Lower A and
Pedals as well as effects and all other settings made on the panel
except for Master Level.
Importantly, Programs also include the PROG MODE setting, making it
possible to store and load certain Programs that always use the physical
positions of the drawbars – Prog Mode being turned Off – and other
Programs where the drawbar LEDs are active, using the stored drawbar
positions – Prog Mode being turned On.
i The drawbar focus for Upper A/B and Lower A/B is also stored
with a Program.
A Program does not store settings made in the System or Sound
menus, except for the Bass User Preset for the User Bass Model.
SELECTING PROGRAMS
The PROGRAM dial is used for selecting
programs in a stepwise fashion and, when a
menu or settings page is open, for changing
settings or parameter values.
PROGRAM LIST
Pressing SHIFT while turning the Program dial
activates the List function, which displays all programs in a list.
To exit the List view, press Exit (Shift).
PROG/PAGE AND BANK
The PROG/PAGE 3/4 buttons are, just like the Program dial, used for
navigating Programs in a stepwise fashion.
A Program BANK on the Nord Organ 3 contains 50 program locations.
There are 8 Program Banks, labeled A-H. Pressing BANK 3/4
(Shift+Prog/Page) allows for quickly switching between different program
banks.
THE “NORD B3” PROGRAM
When shipped, the Nord Organ 3 is set to start up to the special “Nord
B3” program. This program functions differently from other programs in
a couple of important ways:
• This program always loads with the B3 Organ and Bass models
selected, in Panel Mode and with the Rotary Speaker set to its default
values.
• Its program location cannot be stored to, meaning that the program is
“read only” and cannot be overwritten.
This program is intended as a suitable starting point for instruments that
may be used by multiple musicians, where edits made by a previous
user should not persist after the instrument has been turned off.
l The setting for booting to the Nord B3 program can be turned Off,
from the first page of the SYSTEM menu (Shift+Live 1). See page
28 for more details.
B3 Panel
A:01
Bekijk gratis de handleiding van Nord Organ 3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Organ 3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4761 MB |
