Nord Organ 3 handleiding
Handleiding
Je bekijkt pagina 13 van 40
4. ORGAN AND BASS MODELS | 13
4
ORGAN AND BASS MODELS
PROG (PROGRAM) MODE
This important control determines whether the physical
positions of the drawbars are used for all drawbar sets
(“Panel Mode”) or whether the central, LED equipped
drawbars are lit − in that case using drawbar settings
stored with the current program (“Program Mode”).
A number of other panel functions are also independent for the Panel
and Program modes respectively:
• VIBRATO/CHORUS, including Lower and Upper assignments
• B3 CLICK
• Bass Pedal TO LOW MANUAL (To Lower Manual)
• Bass Pedal FX BYPASS
• Bass Pedal SUSTAIN
• B3 PERCUSSION
• USER Bass Model selection
DB SYNC
Press DB SYNC (Shift+Prog Mode) to synchronize the Program Mode
settings with the physical positions of the drawbars.
If the program is currently set to Program Mode, the sync operation will
only synchronize the drawbar positions.
In Panel Mode, DB Sync also synchronizes settings for Vibrato/Chorus,
Percussion and other parameters listed in the Prog Mode section above.
Press the Yes soft button in the screen presented when DB Sync is
pressed, to go through with the sync operation.
DRAWBARS AND LED GRAPHS
The drawbars for UPPER MANUAL B, LOWER MANUAL A and for the
BASS PEDAL are accompanied by LED graphs. In Program Mode, the
LED graph is lit using only the end-point LED for the current setting.
When a Preset is active the entire LED drawbar is used. When Prog
Mode is set to Panel, no LEDs are used for the drawbars.
The settings for UPPER MANUAL A and LOWER MANUAL B always
correspond to the physical position of the drawbars, regardless of Prog
Mode or Preset selection.
When an LED equipped drawbar set is not in focus its LEDs are
dimmed.
PRESETS
The three presets for each manual are global,
meaning that the same range of presets are
accessible from any program.
Moreover, the presets are stored per Organ
Model, giving a dedicated set of presets for
each of the B3, Vx, Farf, Soft B3 and Pipe
options.
i As the Presets are global, and changes to them may affect multiple
Programs, it is adviced to use Program Mode (without Preset
selected) for programs that should be guaranteed to sound the
same when loaded.
EDITING A PRESET
To edit a Preset, keep its button pressed down, as indicated by the
arrow ( ), and adjust the drawbars. The Preset is stored automatically,
with no need for a manual Store operation.
Drawbar with Preset activeDrawbar in Program ModeDrawbar in Panel Mode
Bekijk gratis de handleiding van Nord Organ 3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Organ 3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4761 MB |
