Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 253 van 291
NORD MODULAR G2 V1.4x 13. Module reference: Delay group
Page 253
DELAY GROUP
The Delay module group features a variety of audio delay modules, from basic static delay lines to
modulatable stereo delays with feedback and filter controls. The delay modules are designed for use with
audio signals but of course you can use them for other types of signals as well.
C
OMMON
D
ELAY
GROUP
PARAMETERS
R
ANGE
DROP
-
DOWN
SELECTOR
To optimize the total use of RAM memory in the synth, there is a Range drop-down selector
with which you can choose the maximum delay Time for your application. The ranges are: 5
ms, 25 ms, 100 ms, 500 ms, 1.0 s, 2.0 s and 2.7 s. For example, if you only plan to use a maximum delay
Time of 0.4 seconds, select the 500 ms Range. Note that changing Range will force the Sound Engine to
recalculate and thus cause a brief moment of silence.
T
IME
KNOB
WITH
D
ISPLAY
B
OX
Set the delay Time (or Master Clock Sync factor/divisor) with this knob. The Time/Sync
factor/divisor is shown in the corresponding Display Box.
D
ELAY
TIME
MODULATION
In some modules, the delay time can be modulated from an external source. The modulation
amount can also be attenuated with the corresponding knob of [A
TTENUATOR
T
YPE
I]. Note
that modulating the time of a delayed audio signal will also affect the pitch. This can generate
quite interesting effects.
If you want to modulate the delay time from the minimum value (0.01 ms) to the maximum value
(depending on the Range setting described above) with a positive envelope (that produces a positive
unipolar control signal with a peak to peak level swing from 0 units to +64 units), set the initial delay time
to 0.01 ms and the mod-amount to 100.
If you want to modulate the delay time from the minimum value (0.01 ms) to the maximum value
(depending on the Range setting described above) with an LFO (that produces a bipolar control signal
with a peak to peak level swing from –64 units to +64 units), set the initial delay time to 50% of maximum
Range and the mod-amount to 50. Increasing the setting of the mod-amount will force the delay time to
stay at minimum and maximum delay times for as long as it takes for the modulation signal to get within
the delay time range again.
T
IME
/C
LK
SCROLL
BUTTON
Click this scroll button to change between Time and Clk (Master Clock sync). The Time
Display Box(es) will change according to what you select. The Clk sync mode
automatically locks on to the synth’s Master Clock and here you set the intervals between 1/64T and 2/
1. The ‘T’ (triplet) indicates that the note value is 1/1.5 times the original note value and the ‘D’ (dotted)
indicates that the note value is 1.5 times the original note value.
Note that the Clk sync mode is only available in the DelayQuad, DelayA, DelayB and DlyStereo modules.
Also note that if the delay time (based on the current Master Clock rate and the Sync factor) should
exceed the selected ‘Range’ time (see above), the actual delay time will automatically be divided by two.
I
NPUT
(
S
)
The A
UDIO
or D
YNAMIC
C
ONTROL
/A
UDIO
signal input(s) of the Delay module.
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
