Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 237 van 291
NORD MODULAR G2 V1.4x 13. Module reference: Logic group
Page 237
from 10 msec to 100 seconds. The output pulse duration can be dynamically controlled by a control
signal on the blue control input.
The module can initiate the logic
HIGH
pulse on either the positive edge or the negative edge of the logic signal
on its input, selection is done with the drop-down selector.
D
ELAY
TIME
MODULATION
A D
YNAMIC
C
ONTROL
/A
UDIO
input for modulating the Delay time. The modulation amount can be
attenuated with the knob of [A
TTENUATOR
T
YPE
I].
S
UB
/L
O
/H
I
SCROLL
BUTTON
Select Delay time ranges by clicking this scroll button.
P
ULSE
TIME
KNOB
Set the Pulse time with the knob. Range (Sub): 0.10 ms to 1.00 s, (Lo): 1.04 ms to 10.00 s, (Hi): 10.4 ms
to 100.0 s. If the module receives another edge trigger during the Pulse period, it will extend the duration,
with the value set with the knob.
P
ULSE
T
YPE
DROP
-
DOWN
SELECTOR
Select Pulse Type between Positive Edge Pulse trig and Negative Edge Pulse trig. See also "Common
Logic module parameters”.
D
ELAY
This module can delay the edges of a logic
HIGH
clock
pulse. Depending on the setting of the Delay Type drop-
down selector the module will delay the positive edge, the
negative edge or both the positive and negative edge by the time set with the Time knob. When both the positive
and negative edge are delayed it is like the clock pulse is shifted in time. Note that the module can only
delay one single pulse, meaning that it must have finished with the delay of a clock pulse before it can
receive a new clock pulse to be delayed.
D
ELAY
TIME
MODULATION
A D
YNAMIC
C
ONTROL
/A
UDIO
input for modulating the Delay time. The modulation amount can be
attenuated with the knob of [A
TTENUATOR
T
YPE
I].
S
UB
/L
O
/H
I
SCROLL
BUTTON
Select Delay time ranges by clicking this scroll button.
D
ELAY
TIME
KNOB
Set the delay time with the knob. Range (Sub): 0.10 ms to 1.00 s, (Lo): 1.04 ms to 10.00 s, (Hi): 10.4 ms
to 100.0 s.
D
ELAY
T
YPE
DROP
-
DOWN
SELECTOR
Select Delay Type between Positive Edge Delay (only the positive edge of the input signal is delayed),
Negative Edge Delay (only the negative edge of the input signal is delayed) and Cycle Delay (the entire
input signal cycle is delayed). See also "Common Logic module parameters”.
8C
OUNTER
The 8-Counter steps a logic
HIGH
signal sequentially
over eight outputs. Note that only one of the outputs
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
