Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 147 van 291
NORD MODULAR G2 V1.4x 12. midi implementation: MIDI Automation
Page 147
the View Buttons button will show their assignments.
The
ASSIGN
MIDI
auto assign function will only use available
MIDI
CC
#'s. Panel controls that had already
been assigned to
MIDI
CC
#'s will of course not be reassigned.
If for some reason you want to deassign all
MIDI
CC
# assignments, use the Clear
MIDI
button. Note that
Clear
MIDI
is a very dangerous function, it will not ask you if you are really sure you want to do this and
it clears the assignments immediately. But don't worry if you hit this button accidentally, immediately use
the Undo function in the Edit menu of the editor, or alternatively use Ctrl-Z on the computer keyboard
to undo the clearing.
MIDI T
ALKBACK
FUNCTION
MIDI
TALKBACK
is when two
MIDI
instruments are connected to each other and
MIDI
CC
#'s are shared
with the purpose to control each instrument from the other instrument. Imagine that you want to use
the panel controls of the G2 as a
MIDI
controller to control another instrument. The ideal situation is
when on the other instrument another preset is chosen the G2 would immediately adjust the
LED
-
collared rotary dials to the proper settings of the preset on the other machine. In this situation the G2
has to know what happens on the other instrument, meaning that the other instrument has to tell the G2
its knob settings first. So, the other instrument has to send all its controller values automatically when a
new preset is chosen on that instrument. Most recent
MIDI
equipment and
MIDI
sequencer programs
running on computers will do this, but take note that not all
MIDI
equipment supports this function. Look
in the manual of the other instrument if and how this is supported. If sending the controllers is not done
automatically on selecting the preset on the other machine, it is many times possible to do a 'Send All
Controllers' or 'Dump Parameters' command on the other instrument to tell the G2 what the preset
values are.
T
HE
G2
AS
A
MIDI
CONTROLLER
BOX
Using the G2 as a
MIDI
controller is best done by using the Automate module in the
MIDI
Module Group.
This module has the advantage that it can send and receive in a different
MIDI
channel than the G2 Slot
is actually in. When using a dedicated Automate module for each
MIDI
CC
#, one single Slot can be used
to control different other instruments that are in different
MIDI
channels. Both the Voice area and the
FX area of a Slot can hold some hundred modules, meaning that quite a complex
MIDI
controller setup
can be made in one single patch, controlling several other instruments over one
MIDI
cable.
When professionals set assignments by hand they take notes on paper, as in the future there will come a
moment when you have forgotten how and why certain assignments were made in a certain way.
Remember that other equipment is also involved. Your notes on paper will later prove to be invaluable!
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
