Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 142 van 291
12. midi implementation: MIDI Global Channel NORD MODULAR G2 V1.4x
Page 142
command. S
YS
E
X
can also be used to send intelligent commands, like a command to ask a G2 to dump
the current values of all assigned
MIDI
CC
#’s in a patch or performance. A S
YS
E
X
command for a G2
system specific function has three identification tags, the Clavia identification tag, the G2 system
identification tag and an extra device identification tag. The Clavia and G2 tags are fixed. The
identification tag can be set by you in the G2 System menu under the header of
MIDI
S
YS
E
X
ID
. The tag
value can be 1 to 16, or All (which means undefined). If a S
YS
E
X
command is received your G2 will only
listen to it if the device identification tag in the S
YS
E
X
command is equal to the
MIDI
S
YS
E
X
ID
tag set
on your instrument or if the G2 is set to All. If it is not equal, the S
YS
E
X
command will be ignored by
your instrument. This allows for a setup of sixteen G2 synths that can each receive their own S
YS
E
X
commands, e.g. to receive different patch or performance dumps. See also “Synth Settings {Ctrl-G}” on
page 120.
MIDI GLOBAL CHANNEL
In the Synth Settings window is a setting for the
MIDI
Global Channel. This
MIDI
Global Channel affects
the processing of
MIDI
commands received on the
MIDI
IN
connector. The
MIDI
Global Channel is very
important when using the Performance features of the G2.
All
MIDI
messages received on the
MIDI
Global Channel will be processed like if these messages came
from the keyboard. This means that if you are in Performance Mode and keyboard splits and layers are
set for the Slots, a received note on the
MIDI
Global Channel makes the G2 behave exactly the same like
pressing a key on the keyboard. Meaning that in this case a single
MIDI
Note On command can actually
play sounds in up to four Slots at once. No matter the
MIDI
channels set for the Slots and depending on
which Slots are active and the split and layering settings made in the Performance Settings window.
I
MPORTANT
! In general the
MIDI
Global Channel should always be set to a different
MIDI
channel as the
channels used by the Slots.
When the G2 receives a Program Change conmmand on the channel set for a Slot, the Slot will load the
corresponding Patch from the Patch memory. When the G2 receives a Progam Change command on the
MIDI
Global Channel, it will instead load the corresponding Performance from the Performance
memory.
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
