Nord Lead 2 handleiding
Handleiding
Je bekijkt pagina 59 van 114
Shift Functions Page 59
About Global and Slot Functions
▼ If the function you select can be set independently for each Program Slot (A to D), the selected Program
slot flashes. To make settings for a certain slot, select it.
▼ If the selected function is global for all slots, the selected Function button is steadily lit. Which slot is se-
lected is then of no relevance for the setting.
Setting the Value
Once a function is selected, the value is set using the Program Up/Down buttons.
Returning to the normal display
To go back to the regular functions, press the Shift button once again.
There is no need to store the Shift settings. The settings will automatically remain in memory. However,
some functions are reset to default values when you turn off power, see the description of each function
for details.
Tune (Master Tune)
This is used to tune the Nord Lead 2 to other instruments.
“00” is normal 440Hz tuning. Lower pitches are indicated by a dot to the right of the number and values
higher than normal pitch are indicated without a dot. The values are in cents (hundreds of a semitone).
Out Mode
This function is used to set how the Outputs should be used for handling stereo and individual external
processing of sounds.
The Out mode settings are global for the entire instrument, which means all Programs share the settings
made here.
Nord Lead 2 has four outputs, labelled A-D. It might be a good idea to think of these outputs as two out-
put pairs (A-B and C-D), because that is often how they are used.
Basically there are three possibilities for how a sound appears in the outputs:
▼ The first is that a Program appears with equal level at two outputs, which is what we refer to as mono.
▼ The second option is that the voices (the keys you play) appear alternating between the two outputs in
an output pair (A-B or C-D). This we refer to as stereo. If you play chords in stereo mode, the sound will
be spread out in the stereo image.
When Unison is activated, more than one voice will be used each time you press a key, as described on
page 55. If a Unison Program is played in stereo mode, each time you play a key you will get at least one
voice at one output in a pair and at least one at the other, which will result in a “wide” stereo sound.
▼ The third option is that when playing several Programs at the same time, the different Programs appear
separated on different outputs.
Bekijk gratis de handleiding van Nord Lead 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Lead 2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11965 MB |
