Nord Lead 2 handleiding
Handleiding
Je bekijkt pagina 50 van 114
Page 50 Panel Reference
Arp range
This knob is used to set the octave range of the arpeggio, as the panel indicates. The Off position turns
off the arpeggio completely.
▼ When Echo is selected, this knob determines the number of echo repeats (0 – 8).
You can select if you want the generated arpeggio notes to also be sent to MIDI Out. See page 61.
Arpeggio Hold
Normally, the arpeggio will continue for as long as you keep any keys pressed. By activating the Arpeg-
gio Hold function, you can release the keys and have the arpeggio continue playing.
▼ Activate Arpeggio Hold by holding down Shift and pressing the Arp Switch. The indicator over the button
blinks to indicate that Arpeggio Hold is activated.
The arpeggio will continue playing until you hold down Shift and press the Arp Switch again.
If the Arpeggiator is activated, but the Arp range knob is set to “Off”, the Arpeggio Hold switch will work
as a regular Hold switch: If you play a note and release the key, the note will continue to sound, as if you
were still pressing the key.
About the Echo function
It is important to understand that the Echo function is not the same as a regular audio delay! What hap-
pens when you play a note with Echo activated, is that the same note is triggered (played) again the set
number of times, with gradually decreasing velocity. This has the following consequences:
▼ If the sound you are playing is not sensitive to velocity (Filter Envelope Amount Velocity and Velocity/
Morph are both turned off) there will be no difference whatsoever between the echo repeats.
▼ On the other hand, it is fully possible to use the Velocity/Morph function to make the sound change com-
pletely with the echo repeats, making the function ideal for special effects.
▼ The echo consumes polyphony, i.e. each echo repeat “steals” one voice, just as if you had played the
repeats from the keyboard yourself.
This should not be a problem when using the echo effect with short sounds, but if you play long, sus-
tained notes with echo, you could experience notes being cut off by the echo repeats. The solution is to
lower the Amt setting (decrease the number of repeats) and possibly play shorter notes.
▼ The echo function may give unexpected results if you use another Play mode than Poly.
For example, in Mono mode, each sustaining note will be cut off by the next echo repeat and in Legato
mode, you may end up with no sound at all, since new notes will not re-trigger!
Bekijk gratis de handleiding van Nord Lead 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Lead 2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11965 MB |
