Handleiding
Je bekijkt pagina 19 van 25
19
Please note: To use the energy efficiency boosting function, please follow the
steps above at least one hour before operation.
CAUTION: After turning off the unit, please wait at least 3 minutes
before turning it back on. This will prolong the life of the
compressor.
AUTOMATIC FUNCTIONS
• The cooling system will turn off if the ambient temperature is lower than
the set temperature. However, the fan will continue operating at the set
level. Once the ambient temperature rises above the set temperature,
cooling will resume.
• The heating system will turn off if the ambient temperature is higher than
the set temperature. However, the fan will continue operating at the set
level. Once the ambient temperature drops below the set temperature,
heating will resume.
• This machine is equipped with an ANTI-FROST function. When using the
heating function in low temperature the heater will occasionally stop
heating in order to melt any frost that has accumulated within the air
conditioner. Normal operation will resume in a few moments.
DRAINING THE UNIT
During the cooling and dehumidifying processes, some water will be extracted
from the air and stored within the unit’s water reservoir.
If the water reservoir is full, both the compressor and motor will stop and the
unit will beep (press any button to stop the beeping sound). The full water tank
indictor light will also start flashing.
Bekijk gratis de handleiding van NewAir AC-14100H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | NewAir |
| Model | AC-14100H |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 3288 MB |
