NEO Tools 90-114 handleiding
Handleiding
Je bekijkt pagina 8 van 69
8
To switch off the heater, press the Fig. B4 button to the 0/OFF position.
The other buttons remain in the same position which preserves the
selected heater setting, power / rotation
SECURITY
The radiator is fitted with a safety mechanism that disconnects the power
supply if the radiator is tilted or overturned. The control button for this
mechanism is located on the underside of the heater fig. B5.
ATTENTION It is strongly recommended not to use the button while the
unit is in operation.
USE OF THE HEATER
Always operate the heater in an upright position, following all instructions
and recommendations listed in this manual
LOCATION OF THE HEATER
Place the heater in the coldest part of the room
HEATER CONNECTION
Plug the heater directly into a wall socket. Make sure that the plug fits
tightly into the socket. A loose connection can cause overheating and
damage to the plug.
NOTE: To prevent overloading the circuit, do not connect the heater to a
circuit that supports other electrical appliances.
MAINTENANCE AND STORAGE
• Unplug the appliance from the power supply and allow it to cool
down before cleaning. The housing of the appliance gets dirty easily,
so wipe it frequently with a soft sponge. Wipe any soiled component
with a sponge soaked in warm water with mild detergent. Then wipe
the washed item with a dry cloth. Take care that water does not get
inside the unit. To protect the housing, do not use solvents or strong
detergents for cleaning.
• Care should be taken to prevent dust from settling on the heater
protection grille. For this purpose, the grille should be periodically
cleaned of dust and other elements.
• Clean the power cord and plug, then dry and pack in a plastic bag.
• Store the unit in a dry ventilated room away from children.
Halogen infrared illuminator 90-114
Parameter
Value
Supply voltage
230V AC
Supply frequency
50 Hz
Heating power (1st stage / 2nd stage /
3rd stage)
400W / 800W / 1200W
Protection class
I
IP degree of protection
IPX0
Weight (without accessories)
1.24 kg
Dimensions
360x260x480
Year of production
2025
ENVIRONMENTAL PROTECTION
Electrically-powered products should not be disposed of with
household waste, but should be taken to appropriate facilities for
disposal. Contact your product dealer or local authority for information
on disposal. Waste electrical and electronic equipment contains
substances that are not environmentally friendly. Unrecycled
equipment poses a potential risk to the environment and human
health.
"GTX Poland Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with its
registered office in Warsaw, ul. Pograniczna 2/4 (hereinafter: "GTX Poland ") informs that
all copyrights to the content of this manual (hereinafter: "Manual"), including among
others. All copyrights to the contents of this Manual (hereinafter referred to as "Manual"),
including but not limited to its text, photographs, diagrams, drawings, as well as its
composition, belong exclusively to GTX Poland and are subject to legal protection
pursuant to the Act of February 4, 1994 on Copyright and Related Rights (i.e. Journal of
Laws 2006 No. 90 Item 631 as amended). Copying, processing, publishing, modifying for
commercial purposes the entire Manual as well as its individual elements without the
written consent of GTX Poland is strictly prohibited and may result in civil and criminal
liability.
Bekijk gratis de handleiding van NEO Tools 90-114, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | NEO Tools |
| Model | 90-114 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13803 MB |
