NEO Tools 90-094 handleiding

Heater

NEO Tools

88 pagina's

PDF beschikbaar

Handleiding

Press button 1, temp indicator flashes and its setting is activated. Press 2 or 3 to set the temperature and 1 to save it, or just leave it 5s, setting

is saved automatically.

Press 2/3 on the remoter for required temp and save the setting by OK.

Setting Timer

Timer Start Heating Time

In off-heating mode, press 1 twice to set timer( 0H to 24H), and 2＆3 to set temperature. After setting, it shows area temperature. Indicator 8

lights on in timer period and off when timer ends, then heater starts heating at high level.

Timer Stop Heating Time

In heating mode( high or low level), press 1 twice to set timer and 2 3 to set temperature. After setting, it shows area temperature. Indicator 8

lights on in timer period and off when timer ends. Then heater stops heating.

High/Low Heat Setting

− In working mode, button 2 shifts between high heating and stop heating(indicator 7 lights on when high heating and off when off heating); 5

High/Low Heat Selection

− In working mode, button 3 runs between low heating and off heating(indicator 6 lights on when low heating and off when off heating);

− In working mode, button 12 shifts among Off/Low/High heating, 7 lights on in high heating, 6 light on in low heat, and no light on when off

heating).

Child-lock Setting

Press both 2 and 3 for 3s, system is locked and no setting could be done. After 3 s, display shows again area temperature.

Methods to unlock:

Press both 2 and 3 for 3s, the unit is unlocked.

Display buttons activation

Normally display buttons light are off when unit is working, touch the panel area below temperature, they are on again.

ECO Function

Press both setting button 1 and 3 for 3s ( or press button 11 on remote control), ECO function runs. In this mode, display shows only some

indicators ( depending on what setting shave been done before ECO)

Methods to lock ECO function

Press any button on display 2) Press ECO button 11 on remote control.

Switch the display between °C/F

Press the keys 1 & 2 (the two keys on the left) simultaneously for about 10 seconds.

Open-window Detection

If temperature decreases 3°C or more in 2mins, open-window detection acts and, unit stops heating, indicator 9 flashes. Press button 4, turn off

heater then turn on again open-window detection is closed.

WiFi Reset

In heating mode, press button 1 for 3s, WIFI is reset, with its indicator light on.

Turn off

Turn off switch 4 , heater stops working, and turn off power supply, heater is power off.

WiFi and app operation:

1. The heater should be used within the range of the Wi-Fi router.

NOTE The Wi-Fi router should operate at 2.4 GHz

1. Download the "TuyaSmart" application on smartphone, tablet or computer.

2. After installing the application, select "transfer".

3. To register, enter the email address to which the verification code will be sent. The code must be applied to the application within 60 seconds

of receipt. Then create a password. Selecting "confirmation" completes the registration process in the application.

4. To add a new device, select "Add device".

5. Select "Small device" from the list and then "Thermostat".

After selecting the "Thermostat" option, the application will show information about the selected number of supported frequencies 2.4

GHz Wi-Fi Router, as well as a prompt to enter the Wi-Fi password if the control device is used before is not dependent on the range.

1. Connect the heater to the power supply.

2. Turn on the heater.

3. On the control panel, hold the "M" button, until the blue LED next to the Wi-Fi marking, will flash quickly. Then click "Next" in the application.

4. The application will show the options of "fast flashing" and "slow flashing". Select "fast flashing" or the application will search for the device

itself after a while.

5. After establishing the connection between the application and the device, the name of the device will appear in the application. Select

device selection, then the control panel will appear in the application.

6. The application is ready to control the radiator settings!

The "TuyaSmart" application allows the following settings:

− heating on and off (without operating the control panel power supply, which must be done manually using the main switch),

− thermostat temperature setting,

− timer setting,

− configuration of a weekly heating cycle.

You can control the heater remotely. If the radiator is within range of the paired Wi-Fi Router, the control application will work on the device with

Internet access.

Bekijk gratis de handleiding van NEO Tools 90-094, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.