Handleiding
Je bekijkt pagina 19 van 44
HomeConnect en
Indicator Basic setting Selection
Interior lighting during operation = no
= Yes
1
Cooling fan run-on time = short
= medium
1
= long
= extra long
Telescopic shelves retrofitted = no
1
(for rails and 1-level pull-out)
= yes (for 2- and 3-level pull-out)
Keeping warm over an extended period
"Functions with HomeConnect", Page8
= No
1
= Yes
Water hardness
"Setting the water hardness", Page11
= softened
= soft (up to 1.5mmol/l)
= medium (1.5–2.5mmol/l)
= hard (2.5–3.8mmol/l)
1
= very hard (above 3.8mmol/l)
Automatic rapid heating from 200°C
2
= no
= yes
1
Reset all values to factory settings = No
1
= Yes
.. HomeConnect settings
"HomeConnect ", Page19
14.2 Changing basic settings
Requirement:: The appliance is switched off.
1.
Press and hold the button for approximately
fourseconds.
The first basic setting appears in the display,
e.g. .
2.
Use the temperature selector to change the setting.
3.
Use the or button to switch to the next basic set-
ting.
4.
To save the changes, press and hold the button for
approx. 4seconds.
Note: Your changes to the basic settings will be re-
tained even after a power cut.
14.3 Discarding changes to the basic
settings
Turn the function selector.
All changes are discarded and not saved.
HomeConnect 15 HomeConnect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the HomeConnect app, adjust its basic settings and
monitor its operating status.
The HomeConnect services are not available in every
country. The availability of the HomeConnect function
depends on the availability of HomeConnect services in
your country. You can find information about this at:
www.home-connect.com
.
The HomeConnect app guides you through the entire
login process. Follow the instructions in the HomeCon-
nect app to configure the settings.
Tip: Please also follow the instructions in the
HomeConnect app.
Notes
Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the HomeConnect
app.
"Safety", Page2
Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the HomeConnect
app.
In networked standby mode, the appliance requires a
maximum of2W.
15.1 Setting up the HomeConnect app
1.
Install the HomeConnect app on your mobile device.
2.
Start the HomeConnect app and set up access for
HomeConnect.
The HomeConnect app guides you through the entire
login process.
15.2 Setting up HomeConnect
Requirements
The appliance is connected to the power supply and
is switched on.
You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smart-
phone.
The HomeConnectapp has been installed on your
mobile device.
1
Factory setting (may vary according to model)
2
Depending on the appliance specifications
19
Bekijk gratis de handleiding van Neff B5AVM7AG7A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Neff |
| Model | B5AVM7AG7A |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 11621 MB |
