Neewer QZ-N handleiding

Handleiding

12345678910111213/ 13

Afdrukken

Je bekijkt pagina 9 van 13

Directions for Use

Directions for Use

5. On multi-group UI, swipe up and tap <More Groups> to enable or disable

groups.

Setting M (manual) mode

Setting stroboscopic mode

09

EN

1. On the multi-group UI, tap the slider to switch to single-group UI, then tap M.

Swipe down the display to select flash modes of other groups.

2. On the multi-group UI, drag the slider to adjust flash output power.

Alternatively, short press <SET> button until a yellow frame appears on the

slider, then scroll <SET> button to adjust flash output power.

3. When a single group is displayed, tap to enable/disable the modeling lamp

or choose auto/manual focal length. Slide to adjust flash output power,

modeling lamp, and focal length.

4. On multi-group UI, tap < > and < > to switch between flash and modeling

lamp settings.

※ Tap <+> and <-> to simultaneously adjust flash output power of all groups.

1. When multi-group setting is displayed, swipe from left to right or short

press <M> button to enter stroboscopic mode.

2. Scroll wheels on the display to adjust flash output power, flash frequency,

and times of flashes. Short press <SET> button until a yellow frame appears

on the wheel, then scroll <SET> button to adjust the values.

3. Enable or disable groups on the bottom of the display.

SET SET

SET SET

12345678910111213/ 13

Bekijk gratis de handleiding van Neewer QZ-N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Neewer (Niet gecategoriseerd)

Handleiding bekijken

Neewer QPRO-F

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd