Neewer QZ-N handleiding

Handleiding

12345678910111213/ 13

Afdrukken

Je bekijkt pagina 10 van 13

1. Swipe down to access settings UI,

tap <TCM> to enable or disable the

TCM function.

Use TTL mode to quickly measure the light

and save light metering, then switch to M

mode to fine-tune the metering.

Directions for Use

Directions for Use

SET

Menu

Go to menu and tap < > to enable or

disable the single-contact function.

※ Once enabled, TTL and stroboscopic modes

are not available.

※ Not all cameras support this function.

※ Flashes may be out of sync when using high

shutter speed in this mode.

1. Swipe down to access settings UI. Tap < >

to enable or disable modeling lamp.

3. On single-group UI, drag the modeling

lamp's slider to adjust its brightness.

Tap it to enable or disable modeling lamp.

2. On multi-group UI, tap < > at the bottom

of the display to switch to modeling lamp,

then drag the slider to adjust the modeling

lamp's brightness. Tap <+> and <-> to

simultaneously set multiple modeling lamps.

Setting modeling lamp

10

EN

SET

Menu

1. Swipe down to access settings UI, tap < >

to lock the display.

2. Tap and hold the display or long press < >

button for 2s to unlock.

Display lock

SET

Menu

2. Or go to menu to enable or disable the

TCM function.

TCM

Setting single-contact function

SET

12345678910111213/ 13

Bekijk gratis de handleiding van Neewer QZ-N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Neewer (Niet gecategoriseerd)

Handleiding bekijken

Neewer QPRO-F

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd