Neewer QPRO-F handleiding
Handleiding
Je bekijkt pagina 16 van 20
※ When the single-point triggering mode ("SHOOT") is
turned on, the product can only send flash triggering
signals which will disable other functions.
Sync Port Setting
1. Press the <MENU> button to enter C.Fn SYNC page,
rotate the dial to choose <SYNC>, then, press the
<SET> button. You can now rotate the dial to
choose "IN" or "OUT". Short press the <MENU>
button to return to the menu page.
1.1 Choose "IN" to transmit signal to trigger flashes.
1.2 Choose "OUT" to transmit signals to trigger camera
shutter or to trigger speedlite flashes via PC sync.
Restore Factory Settings
In the main UI, press and hold both "RST" buttons until
"RESET" appears on the screen. The factory reset is now
complete.
Trigger Settings
EN
16
Shoot Settings
Press the <MENU> button to activate C.Fn SHOOT. Press
the <SET> button to switch between <ON> or <OFF>.
Press <MENU> again to return to menu page.
ON: the single contact point mode is activated. In M and
Multi flash mode, the master flash will only transmit
trigger signals to slave flash.
OFF: the single contact point mode is deactivated.
When camera shutter is released, the master flash
will transmit trigger signals and flash settings to
slave flash.
CLEARSET
Ver:XX.X
STBY
LIGHT
SYNC
BEEP
IN
OUT
CLEARSET
Ver:XX.X
LCD
DIST
ID
SHOOT
OFF
ON
RS T
Bekijk gratis de handleiding van Neewer QPRO-F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Neewer |
| Model | QPRO-F |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1629 MB |
