Navman MiVue Rider DC handleiding
Handleiding
Je bekijkt pagina 10 van 35
9
1. Peel o the 3M adhesive backing from the helmet mount and ax the mount onto the
motorcycle helmet. Please note that the orientation of the quick-release clip must match
the direction shown in the image:
Note:
Apply rm pressure to assure good contact between the 3M adhesive tape and helmet surface.
For best results, allow at least 12 hours before attaching the device to the helmet mount to assure a
strong bond between the 3M adhesive tape and helmet surface.
2. Attach the helmet camera to the mount by sliding it downward until the device snaps into
place as indicated by a “click” sound.
3. Apply pressure on the clip to release the helmet camera from the mount (recording stops
whenever the helmet camera is not attached to the mount).
Bekijk gratis de handleiding van Navman MiVue Rider DC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Navman |
| Model | MiVue Rider DC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2200 MB |
