Navman MiVue 930 DC handleiding
Handleiding
Je bekijkt pagina 9 van 46
8
1. Before attaching the device mount to the windscreen, it is recommended to clean the
windscreen with rubbing alcohol and make sure that the installation area is free of dust,
oil and grease.
2. If installing the device using an electrostatic sticker (optional), attach the electrostatic
sticker to the windscreen (make sure there are no air bubbles trapped underneath), then
detach the device mount from the dash cam, remove the liner, and press rmly to install it
over the electrostatic sticker. To install without the electrostatic sticker, detach the device
mount from the dash cam, remove the liner, then press rmly to install the mount on the
windscreen directly.
Note:
If your vehicle’s windscreen has a third visor frit (a patch of black
dots around the rear view mirror), please do not attempt to ax
the electrostatic lm/dash cam in this area as it is likely to fall o.
Attaching the device to an electrostatic sticker allows for the easy
removal of the device mount from the windscreen.
3. Connect the vehicle power adapter to the cigarette lighter. Route the cables through the
top ceiling and the A-pillar so that it does not interfere with driving. Make sure that the
cable installation does not interfere with the vehicles airbags or other safety features.
4. When adjusting the viewing angle, make sure that the camera’s view is parallel with level
ground and the ground to sky ratio is close to a 50/50 split.
Bekijk gratis de handleiding van Navman MiVue 930 DC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Navman |
| Model | MiVue 930 DC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2960 MB |
