Narwal S30 handleiding

18 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 5 van 18
Type
Low (≤10%)
Medium (10<X≤50%)
Suicient (50<X≤100%)
Dirt detected
High dirtiness level
Error
Cleaning underway
Cleaning paused
Steady Red
Steady Yellow
Steady Green
Steady Yellow
Steady Orange
Flickering Red
Steady Blue and Purple
Breathing Blue and Purple
Charging Status
and Baery Level
Dirt and Status
Monitoring Loop
StatusIcon Description
AI Mode
Auto adaption to a variety of dirty surfaces powered by smart detection of floor dirt level and
smart adjustment of suction power, water volume, and other indicators.
Floor Cleaning DescriptionDescription
Floor Cleaning Description
Press and hold the Trigger Buon to activate MAX Enhancement for the most powerful
cleaning performance to tackle lots of stains or extremely stubborn stains.
When the angle between the handle and the floor is below 25°, the vacuum mop will automatically
switch to the Low Areas Mode. As such areas are generally filled with lots of hairs, dust, and flu, the
machine will intelligently adjust the suction power to avoid dust floating around.
Note: DO NOT lay the machine horizontally when not in use to prevent backflow of sewage and damage to
the machine.
Used for absorbing water on the floor, suitable for bathrooms and spilled liquids.
Suitable for relatively clean floors to deliver a noise-free experience and secure a longer baery
life to clean more floors.
Suitable for hardwood floors in living rooms, uses less water for quicker drying, and can remove
dust, lint, and hair from bedroom floors.
MAX Enhancement
Cleaning in low areas
Suction Mode
Quiet Mode
Wooden Floor Cleaning
04
Short press: start self-cleaning and iron drying (iron drying
will start after self-cleaning is completed)
Buon
Power On/O
buon
When cleaning the floor
Short press: power on/pause
Long press for 2s: Power o
Short press: start iron drying only
Short press: end the current task
Short press: switch the mode (AI/Wooden Floor/Quiet/Suction)
Press and hold for 2s: Switch volume (high/low/mute)
Press and hold for 2s: start self-cleaning only
When cleaning the floor
During charging with the screen on
During charging with the screen on
During self-cleaning or iron drying
During self-cleaning or charging with
the screen on
Action
Function
Instructions for Use
Buon functions
*Note: When the vacuum mop is on the base and the screen is dark, you can press any buon to wake up the screen.
Mode buon
Self-Cleaning
buon
About the screen
AI Mode
Wooden Floor Cleaning
Quiet Mode
Suction Mode
MAX Enhancement
Self-Cleaning and Iron Drying
Charging Status and Baery Level
Dirt Detecting and Status Monitoring Loop
Icons
Type
Cleaning mode
AI Mode
Wooden Floor Cleaning
Quiet Mode
Suction Mode
MAX Enhancement
Self-cleaning and Iron Drying
Self-cleaning and Iron Drying paused
Steady white
Steady white
Steady white
Steady white
Steady white
Steady white
Faint White
Self-cleaning and
Iron Drying
StatusIcon Description

Bekijk gratis de handleiding van Narwal S30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkNarwal
ModelS30
CategorieNiet gecategoriseerd
TaalNederlands
Grootte2801 MB