Nanlite PavoTube II T8-7X handleiding
Handleiding
Je bekijkt pagina 8 van 12
7
Safety Precautions
1. Please check for possible damage caused in transit after opening the package. Please do not use if damage is
found. And contact with the distributor or manufacturer as soon as possible.
2. Please do not use a power cable with damaged insulation. Please do not unplug too hard or drag the power cable
directly.
3. Please make sure the voltage of power supply accords with the voltage specified on the fixture before installation.
4. Please turn the fixture off when it is not in use or before cleaning.
5. Please keep the fixture safely stored and away from children.
Operating Instructions
1. Long press button to turn on the fixture.
2. DIM button: Short press DIM button to adjust the intensity in certain intervals of 0%, 20%, 40%, 60%, 80%, 100%.
When at 100%, press the DIM button, the intensity will reset at 0%.
3. button: Short press the button to switch modes between CCT and HSI.
4. CCT/HUE button: Short press CCT/HUE to adjust CCT or HUE settings in certain intervals. When reaching to
maximum value, it will return to minimum value upon pressing the button again. (When the HUE is adjusted
to 360, press the button again it will return to 30.)
CCT: 2700K, 3200K, 4300K, 5600K, 6500K, 7500K.
HUE: 0, 30, 60, 90, 120, 150, 180, 210, 240, 270, 300, 330, 360.
5. Bluetooth Reset: Long press the three buttons at the same time until the fixture has bule twinkle for 3 seconds and
reset completes.
6. Long press to turn off the fixture.
Bekijk gratis de handleiding van Nanlite PavoTube II T8-7X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nanlite |
| Model | PavoTube II T8-7X |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 706 MB |
