Nanlite PavoTube II T8-7X handleiding
Handleiding
Je bekijkt pagina 6 van 12
5
Remote Control and Control Method by Wire Controller
·PavoTube T8-7X supports DMX and wire controller control, and includes a built-in Bluetooth module as well.
▲The channel needs to be set before operating remote control via DMX.
1. Channel and DMX setting, including CHANNEL, DMX MODE, DMX REDUCED CHANNELS, DMX DIMMING CURVE
and DMX SMOOTHING.
The channel of the fixture can be set by connecting DMX/RDM console, wire controller or by APP via the transmitter
box. The DMX setting can be made via connecting the wire controller. (For specific operations, please refer to the
relevant manuals.)
2. DMX Remote Control
①Connect the fixture to the DMX/RDM console with a DMX adapter cable.
The connection between the fixture and DMX adapter cable is as follows:
·A DMX adapter cable must be used for the connection between light fixture and DMX/RDM console, or between
light fixture and light fixture.(DMX adapter cable is not included.)
XLR plug/socket and the wire should be connected as shown above.
·Pin1, Pin2, Pin3 for connecting DMX signal. Pin4, Pin5 has no connection.
▲NOTE: When connecting DMX, make sure the internal pin is not in contact with the inner case. The fixture can
match the DMX512 (1990) control signal.
DMX IN DMX OUT
1 GND
2 DATA-
3 DATA+
NC
NC
NC
NC
GND 1
DATA- 2
DATA+ 3
Bekijk gratis de handleiding van Nanlite PavoTube II T8-7X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nanlite |
| Model | PavoTube II T8-7X |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 706 MB |
