Nanlite PavoTube II 6XR handleiding
Handleiding
Je bekijkt pagina 14 van 22
WWW.NANLITE.COM
PavoTube Ⅱ 6X/6XR
11
(2) Mode Operation
In the mode operation interface, press the Up or Down buttons to select a parameter. Press the Confirm button to
confirm the selection (highlighted indicates selected). Press the Up or Down buttons to adjust the parameter, and
press the Confirm button again to deselect and complete the setting.
5.1.2. DMX Control
(1) DMX Connection
① Connect the fixture to the DMX console via a DMX cable
The fixture needs a USB-C to DMX cable splitter (CB-DMX-USBC-1/3 II), compatible with a 5-pin socket. A 5-pin
shielded cable with a diameter of no less than 0.3mm must be used to connect the light fixture to the DMX console.
The fixture is built with a 5-pin XLR socket. If the DMX console is built with a 3-pin XLR socket, an adapter will be
required.
② DMX Termination Resistor
When connecting fixtures with DMX cables, the DMX out port of the last fixture in the daisy chain must be connected
to a DMX termination resistor (not included). This effectively prevents interference during DMX signal transmission.
(2) DMX Settings
The DMX settings include Address, DMX Mode, DMX Pixel, Reduce Channels, Smoothing, Dim Curve and Loss
Behavior.
Bekijk gratis de handleiding van Nanlite PavoTube II 6XR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nanlite |
| Model | PavoTube II 6XR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2783 MB |
