Nacon Revolution X Pro handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748/ 48

Afdrukken

Je bekijkt pagina 12 van 48

EN /

I How to use this controller on PC

The Revolution X controller is also a Plug-n-Play device. In other words, the necessary

driver software will be automatically installed when the controller is rst connected to

your computer. Here is what to do:

Turn on your computer, wait for it to start, and go to your Windows desktop.

Find an unused USB port on your PC and plug the USB cable of your Revolution X

controller into it.

Windows will detect the new device and, after a few seconds, start installing the

appropriate drivers. The process will be indicated by a small icon in the task bar.

The installation takes more or less time depending on the speed of your system. At

the end of the process, the following message will appear: «You can now use your

Revolution X. »

I Shortcutkeyconguration

The 4 shortcut keys can be congured in two different ways:

Either using the «Revolution X» Interface with personalisation in advanced mode.

Or

On the controller itself when in 'Standard' mode.

Please note that the procedure below is only valid in standard mode. In Advanced mode,

you will have to congure the shortcut keys using the Revolution X app.

1 Make sure that the Standard prole/custom prole switch (No. 17) is in the

'Standard' position

2 Press and hold the prole button for 3 seconds

The Prole LED indicators are OFF and the ring, around the Right stick, will flash.

3 Press the shortcut button (S1, S2, S3 or S4) that you want to «program» and the

LED corresponding to the button lights up.

4 Tap the button you want to associate with the shortcuts

5 The LED associated with the shortcut flashes 3 times, to conrm the link.

6 If you program the wrong key, simply repeat step 4 and create a link with the button

you want.

7 To link another shortcut to another button, repeat operations 3 to 5

8 To delete a link, once the shortcut has been selected (steps 3), press the same

shortcut again, and the LED corresponding to this shortcut will flash 3 times.

9 Once you have nished your settings, press the prole button for 3 seconds to exit

this mode.

The prole LEDs will go out and the ring, around the Right stick, will be constant.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748/ 48

Bekijk gratis de handleiding van Nacon Revolution X Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Gerelateerde producten van Nacon (Niet gecategoriseerd)

Handleiding bekijken

Nacon Wired Compact

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd