MSW -SPP48-110 handleiding
Handleiding
Je bekijkt pagina 24 van 255
EN
Electrical wiring diagram
1- Black
2- Blue
3- Brown
4- Yellow-green
To switch on the pump set the On/Off switch to the On position.
If the overcurrent circuit breaker is tripped by a short circuit, overheating, etc., once the problem has been
resolved (the cause of overcurrent circuit breaker tripping), release the circuit breaker by pressing the circuit
breaker button on the control panel housing.
Dismantle the pump
In areas where temperatures drop below zero, dismantle the pump for the winter season and store it in
accordance with the guidelines in “transport and storage” section.
To dismantle the pump:
Set the On/Off switch to the Off (“0”) position.
Disconnect the pump from the power source.
Extract the pump from the borewell using a steel or a different secure rope attached to the pump handles.
Disconnect the water delivery pipe from the pump.
Empty any water remaining in the pump by turning it upside down.
Once the pump is dry, it is ready to be stored safely.
Transportation and Storage
Shaking, crashing and turning the device upside down should be prevented when transporting it. Store it in
a properly ventilated location with dry air and without any corrosive gas.
Store the device in ambient temperatures above zero in a horizontal position. If the pump has been stored
for more than a few days, ensure the device functions properly before installing it again.
Bekijk gratis de handleiding van MSW -SPP48-110, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -SPP48-110 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 34027 MB |
