MSW -SPP48-110 handleiding
Handleiding
Je bekijkt pagina 22 van 255
EN
5- Pump power cable
6- Water discharge opening
Control panel
1- Housing
2- On/Off switch
3- Overcurrent circuit breaker
4- Pump power cable gland
5- Power cable gland
Before the first use
Upon receipt of the goods, check the packaging for integrity and open it. If the packaging is damaged, please
contact your transport company and distributor within 3 days, and document the damages as detailed as
possible. Do not turn the package upside down! When transporting the package, please ensure that it is kept
horizontal and stable.
Disposing of packaging
Please keep all packaging materials (cardboard, plastic tapes and Styrofoam), so that in case of a problem, the
device can be sent back to the service centre in accurate condition!
Device use
CAUTION! Failure to observe the following guidelines may lead to injury, constituting a risk to life and
health:
Only a person with the appropriate qualifications and skills should put in place the electrical connections
and install the pump.
Connect the device power cable in accordance with the electrical diagram included in these instructions.
The control panel should be located in a place protected against water ingress. Do not operate the device
with wet hands.
Extensions to the power lead, if required, should be hermetically sealed and performed by a person with
appropriate qualifications.
Do not use the power cable to carry the device.
The pump should be earthed. Use a residual current device up to 30mA in the electrical system.
Bekijk gratis de handleiding van MSW -SPP48-110, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -SPP48-110 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 34027 MB |
