MSW -MIB-R-400 handleiding
Handleiding
Je bekijkt pagina 25 van 184
EN
On the outside of the transom, unscrew the plug and wait for water to flow
through it. Then screw it back on tightly.
3.2.3 Air deflation
Before deflating air from the chambers, remove the seat(s) and bottom panels.
Unscrew the air protective plugs and release the air valves just by pressing the air
valves - the air should be released gradually in each chamber, otherwise the
bulkhead may be damaged. You can also use a pump to deflate the air from
chambers faster - connect one end of the pump hose to its air inlet and pump the
air out of the chambers.
3.3. Cleaning and maintenance
a) The device should be deflated when not in use.
b) Use only non-corrosive agents for surface cleaning. Only mild cleaning agents
such as soap and water may be used to clean the product.
c) Store the device in a cool and dry place, protected from moisture and direct
sunlight.
d) Regularly inspect the device for serviceability and any damage.
e) Use a soft cloth for cleaning.
f) Do not use sharp and/or metal objects (e.g. wire brush or metal spatula) for
cleaning as these may damage the surface of the device material.
g) If the surface of the inflatable boat is contaminated with any operating fluids
from the engine, the contaminated places should be immediately and
thoroughly cleaned.
h) Store in cool and shaded places, free of moisture. Before storing, the
product should be washed, then thoroughly rinsed (especially when used in
Bekijk gratis de handleiding van MSW -MIB-R-400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -MIB-R-400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52749 MB |
