MSW -MIB-R-400 handleiding
Handleiding
Je bekijkt pagina 24 van 184
EN
the holes in the oars (in place of the black bushings). Secure them on the by
reattaching the nuts on the side boards:
j) Optionally, mount a suitable outboard engine on the transom - follow the
instructions in the engine manual.
k) IMPORTANT: before launching the product in water, make sure that it is
completely airtight, i.e. it has not been damaged in transport and its air
valves are tightly closed. To do this we recommend using a water solution
with dissolved soap or washing liquid. Spray or pour this solution over key
parts of the inflatable boat such as seams, air valves, etc. and watch for air
bubbles forming on their surface. If there are any, locate the source and
eliminate it, e.g. in the case of air valves tighten them with the supplied
spanner:
3.2.2 Drainage of accumulated water
It is normal for an inflatable boat to collect some water when it is used or stored
outdoors. Before launching it on the water, you can get rid of that water through
the drain plug located at the back at the bottom of the transom.
Bekijk gratis de handleiding van MSW -MIB-R-400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -MIB-R-400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 52749 MB |
