MSW -ISU-M190W handleiding
Handleiding
Je bekijkt pagina 6 van 66
EN
This User Manual has been translated for your convenience using machine translation. Reasonable
efforts have been made to provide an accurate translation; however, no automated translation is
perfect nor is it intended to replace human translators. The official User Manual is the English
version. Any discrepancies or differences created in the translation are not binding and have no
legal effect for compliance or enforcement purposes. If any questions arise related to the accuracy
of the information contained in the User Manual, please refer to the English version of those
contents which is the official version.
Technical data
Parameter description Parameter value
Product name
Styrocutter
Model
MSW-ISU-M190W
Rated voltage [V~] / frequency [Hz]
230/50
Rated power [W]
190
Work cycle
15 seconds on / 45 seconds off
Temperature [°C]
200 – 450
Weight [kg]
0.75
Introduction
This product is a professional-grade hot cutting tool for foamed plastics. It heats up in seconds and
provides the operator with temperature control. Working with foamed plastics has never been this
easy, inexpensive, and mess-free.
Recommended use
The product can easily cut expanded polystyrene (EPS), extruded polystyrene (XPS), polyethylene,
cross-linked polyethylene, polypropylenes, and many other foamed plastics and materials. Consult
the foam manufacturer for safe and proper cutting procedures.
Blade installation
Note: Always unplug the power cord of the product before installing or removing the blades. Allow
sufficient cooling time for blades, blade holders, and mounting screws before handling.
Caution: The blades have a sharpened razor edge. For the cleanest cut, always cut in the direction of
the sharpened edge.
Straight blade
1. Loosen the screws on the blade holders with the wrench.
2. Slide the blade under the square pressure plates until snug.
3. Securely tighten screws to ensure proper electrical connection. Do not over-tighten.
4. Once the blade is firmly in place, plug the product into a standard 230-volt power supply.
5. The temperature control knob has 16 click settings that correspond to the graduated ridges
on the surface. The smaller the ridge, the lower the power setting.
Bekijk gratis de handleiding van MSW -ISU-M190W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -ISU-M190W |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8803 MB |
