MSW -ISU-HGIL 4 handleiding
Handleiding
Je bekijkt pagina 27 van 301
EN
PERSONNEL SAFETY
1. Before using the device, always ensure that the device, tools, and power
cable are undamaged and functioning properly. If any part is not in good
condition, the device and/or those parts must not be used.
a. Inspect the device, tools, and cable for any breakage, damage,
cracks, deformations, obvious signs of wear, or other impairments
b. Clean the ventilation slots and tighten any loose connections. Check
the voltage to the cutting wire, and wear protective glasses during
this process. Perform a test run to identify any undetected damage
2. Incorrect or improperly mounted tools pose a risk of injury. Only use the
original tool specified by the manufacturer for your device type and intended
use. The use of intermediate layers, adapters, or similar modifications is
prohibited
3. Repairs must only be carried out by authorized workshops using original
replacement parts. Defective or worn tools must be replaced
LOOSENING A BLOCKAGE
1. If the tool becomes stuck, follow the points above before pulling the wire out
of the rigid foam.
RESPONDING TO AN EMERGENCY
1. Eye injuries must be examined by a physician.
2. Burns:
a. For a 1st-degree burn, cool the affected area with cold water.
b. For 2nd or 3rd-degree burns, seek immediate treatment from a
physician.
Bekijk gratis de handleiding van MSW -ISU-HGIL 4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -ISU-HGIL 4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 49218 MB |
