MSW -GH-01 handleiding
Handleiding
Je bekijkt pagina 7 van 10
EN
6. Centre Load on Jack Saddle
Off-centre loads or using the jack on an uneven surface can cause load loss or damage.
7. Do not raise or lower the vehicle unless tools, materials, and people are clear.
8. Always lower the jack slowly.
3.1. Device description
3.2. Device use
WARNING
DO NOT USE THE JACK TO SUPPORT OR STABILIZE A LOAD.
Using the jack for support may cause unexpected movement, leading to serious
injury or death.
Always securely chock and block (stabilize) the lifted load.
Never place any part of the body under a raised load without proper chocking and
support.
Never use the jack on a curved or tubular vehicle bumper.
This may cause the vehicle to slip off the jack and fall, leading to severe injury or
death.
Use a bumper lift for vehicles with curved or plastic bumpers.
Do not move or dolly the vehicle while the jack is in use.
1. RAISING THE JACK
1) Before use, ensure the transmission weight and size do not exceed the jack's capacity.
2) Ensure the vehicle from which the gearbox is being removed is correctly positioned.
3) Check that the handbrake is applied and raised to allow proper positioning of the transmission jack.
4) Ensure there are no other persons around or under the vehicle.
5) Ensure the saddle is in its lowest position, then use the handle to transport and centrally position the
jack beneath the vehicle's transmission.
6) Assemble the handle, ensuring it aligns with the slots.
7) Close the release valve by turning it clockwise until it is firmly closed.
Bekijk gratis de handleiding van MSW -GH-01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -GH-01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1624 MB |
