MSW -GH-01 handleiding
Handleiding
Je bekijkt pagina 6 van 10
EN
a) Do not overload the device. Use the appropriate tools for the given task. A correctly-selected device
will perform the task for which it was designed better and in a safer manner.
b) When not in use, store in a safe place, away from children and people not familiar with the device who
have not read the user manual. The device may pose a hazard in the hands of inexperienced users.
c) Keep the device in perfect technical condition. Before each use check for general damage, especially
check moving components for cracked parts or elements, and for any other conditions which may
impact the safe operation of the device. If damage is discovered, hand over the device for repair
before use.
d) Keep the device out of the reach of children.
e) Device repair or maintenance should be carried out by qualified persons, only using original spare
parts. This will ensure safe use.
f) To ensure the operational integrity of the device, do not remove factory-fitted guards and do not
loosen any screws.
g) When transporting and handling the device between the warehouse and the destination, observe the
occupational health and safety principles for manual transport operations which apply in the country
where the device will be used.
h) Avoid situations where the device stops working during use due to excessive loading. This may result
in overheating of the drive elements and damage to the device.
i) Do not move, adjust or rotate the device in the course of work.
j) Do not leave this appliance unattended while it is in use.
k) Clean the device regularly to prevent stubborn grime from accumulating.
l) Do not work on two workpieces at the same time.
m) The device is not a toy. Cleaning and maintenance may not be carried out by children without
supervision by an adult person.
n) Keep the device away from sources of fire and heat.
ATTENTION! Despite the safe design of the device and its protective features, and despite the use
of additional elements protecting the operator, there is still a slight risk of accident or injury when
using the device. Stay alert and use common sense when using the device.
3. Use guidelines
The product is a specialized lifting device designed to support, raise, and lower transmissions during installation
or removal in vehicles. It is commonly used in automotive repair shops and garages, allowing mechanics to
safely handle heavy and complex transmission components with precision.
The user is liable for any damage resulting from unintended use of the device.
Safety principles
1. Position the Jack
Position the jack to only lift on the areas of the vehicle as specified by the vehicle manufacturer.
2. Always Use Jack Stands
DO NOT USE wood blocks or any other non-approved lifting devices for lifting with the jack or raising
a load.
Failure to follow these warnings may cause injury or death.
3. Do Not Overload Jack
Do not exceed the jack’s rated capacity. Overloading can cause damage or failure of the jack.
4. Always Use on Hard, Level Surfaces
5. Chock and Block (Stabilize)
Apply the parking brake before operating the jack.
A chock is a wedge used to steady an object, hold it motionless, or prevent wheel movement.
Chock the wheel opposite to the one being lifted.
When blocking a load, ensure the block(s) or stabilizer(s) have a weight capacity greater than the
lifted load.
Bekijk gratis de handleiding van MSW -GH-01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -GH-01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1624 MB |
