MSW -CONCRETE-VPO750 handleiding
Handleiding
Je bekijkt pagina 24 van 264
EN
IV. TROUBLE SHOOTING
PROBLEM
CAUSE
REMEDY
UNEVEN SEGMENT
WEAR
• (in wet cutting) insufficient
water (usually on one side of
blade).
• Equipment defects also can
cause the segments to wear
unevenly.
• Saw head is misaligned.
• Flush water system
• Check flow to both sides of blade.
• Replace had bearings, worn arbor shaft
or misalignment to spindle.
• Check alignment for squareness, both
vertically and horizontally, of the saw
blade.
SEGMENT CRACK
• Blade is too hard for material
being cut
• Use a blade with a softer bond / matrix.
SEGMENT LOSS
• Blade overheats because of
coolant (water or air)
• Core is worn from
undercutting
• Defective collars / flanges set
blade out of alignment
• Blade is too hard for material
being cut
• Blade is cutting out of round,
causing a pounding motion
• Improper blade tension
• (Wet Cutting) Check water lines
• Make sure flow is adequate on both
sides of blade and there are no
blockages
• Use sufficient water to flush out the
cut
• (Dry cutting) Run blade free of cut
periodically to air cool
• Clean collars / flanges or replace if they
are under recommended diameter
• Use proper blade specification for
material being cut
• Replace worn bearings; realign blade
shaft or replace worn blade mounting
arbor
• When ordering blades match shaft
speed of saw
• Check spindle speed to ensure blade is
running at correct RPM
• Avoid twisting or turning blade in the
cut
CRACKS IN CORE
• Blade flutters in cut as a result
of losing blade tension
• Blade specification is too hard
for the material being cut
• Tighten the blade shaft nut
• Make sure blade is running at proper
speed and that drive pin is functioning
properly
• Use a softer bond / matrix to eliminate
stress
Bekijk gratis de handleiding van MSW -CONCRETE-VPO750, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -CONCRETE-VPO750 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 46743 MB |
