MSW -CCTR-8PU handleiding
Handleiding
Je bekijkt pagina 17 van 22
EN
Wipe the outer surface of the machine with the oil-moistened cloth to prevent rust.
Cover the unit and store it in a dry, dust-free, and humidity-free environment.
BEARINGS
The following bearings are sealed for durability and minimal maintenance:
Centrifugal clutch – Grease-lubricated
Vibrator – Oil bath-lubricated
TROUBLESHOOTING
SYMPTOM POSSIBLE CAUSES AND SOLUTION
The motor will not start.
Check the ON/OFF switch to ensure that it is switched to
‘ON’.
Check the fuel supply.
If the motor is fitted, check the crankcase oil level as an oil
sensor device is fitted to these motors, which prevents
starting and stops the motor when the oil level is low.
Ensure the spark plug ignition lead is connected.
Chock the carburettorlet and bowl to ensure they are clean.
The motor stops.
Check the fuel supply.
Check that the fuel cock is turned on.
Check the condition of the air filter.
The Petrol Motor lacks power.
Check the condition of the air filter.
Check the condition of the spark plug.
lnsufficient vibration
Check for a slipping or a missing vee belt.
Check that the motor-governed speed is 3,500 r/min.
The machine is not moving freely Check the underside of the plate for a build-up of material.
Bekijk gratis de handleiding van MSW -CCTR-8PU, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -CCTR-8PU |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4224 MB |
