MPM MOD-55 handleiding
Handleiding
Je bekijkt pagina 29 van 126
29
EN
CREVICE ATTACHMENT
It is used for cleaning hard-to-reach areas such as corners of rooms, next to and under
furniture and in folds and crevices. It is also perfect for cleaning computer keyboards,
drawers, radiators or window frames.
FLOOR BRUSH
It is designed for vacuuming scratch-prone surfaces such as wooden floors, parquet floors
and floor panels.
SMALL TURBO BRUSH WITH AN ADAPTER
It is designed for effective cleaning of surfaces such as carpets or fitted carpets. It has been
equipped with arotating brush to enable thorough cleaning of surfaces. The synthetic bris
-
tles of the turbo brush easily allow for the deep cleaning of delicate structures. Particularly
suitable for pet owners, as it accurately picks up hair that is deeply buried in the carpet.
LONG CREVICE ATTACHMENT
It is great for vacuuming areas where the standard nozzle cannot access or where ac
-
cess is severely limited. The attachment is characterised by its length and flexibility, which
means that using it in hard-to-reach places will not cause any problems. The product will
be perfect not only for vacuuming the car, but also for those places in the house that are
problematic for an ordinary vacuum cleaner nozzle.
CONTROL PANEL IN THE SUCTION HOSE HOLDER
The control panel on the suction hose holder (12) allows the suction power to be adjusted
to the surface that is to be vacuumed without the need to lean down. The buttons on the
handle allow you for changing the suction power adjustment settings easily and for switch
-
ing the vacuum cleaner on and off. In order to operate the control panel in the handle, first
start the vacuum cleaner with the on/off button (1).
DUST BAG REPLACEMENT
In order to change the dust bag (24), switch off the vacuum cleaner using the on/off button
(1) and disconnect it from the power source. Detach the suction hose (9), then use the top
cover opening button (18) and open the top cover (17). Remove the rack (25) with the dust
bag, slide the old bag out of the rack and insert the new bag. The rack fits under the cover
in one correct position. Close the cover (17) and connect the suction hose (9).
CLEANING AND REPLACEMENT OF AIR FILTERS
Every now and then, normal operation of the vacuum cleaner requires the replacement
or cleaning of the filter that covers the motor on the dust bag side and the filter at the air
outlet. To this end, disconnect the appliance from the power source and detach the suc
-
tion hose (9).
1. Press the two buons located on the protecve grille (23) on the back of the vacuum cleaner and
remove the grille. Remove the sponge lter from it (22) and then the HEPA lter (21)
2. Remove the motor sponge lters (20). You will gain access to the lters by liing the top cover (17)
and removing the dust bag (24) with the rack (25). Pull the lter grille upwards and aer removing
it, remove the sponge lters (22).
Bekijk gratis de handleiding van MPM MOD-55, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MPM |
| Model | MOD-55 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 15766 MB |
