Handleiding
Je bekijkt pagina 33 van 118
33
EN
BLENDER BOTTLE ASSEMBLY
CAUTION! The knives of the device are sharp. Handle them with care. Grip the knife
only by its plastic base.
1. Turn the blender bottle (7) so that the hole for screwing the base is at the top.
2. Put the bottle base ring (8) on the hole with the knife facing the inside of the jug and screw it
in a clockwise direction, paying attention to the correct fit of the threads.
If the bottle base ring (6) is removed, proceed in reverse as for installation.
USING A BLENDER
CAUTION! Do not fill the blender bottle above the maximum values.
CAUTION! Do not run the blender if the bottle is empty.
CAUTION! Do not put on or take off the blender bottle while the machine is running.
CAUTION! Wait for the blades to stop before removing the bottle from the blender
housing (3)!
1. Place the blender housing (3) on a dry, stable, level surface.
2. Cut large product ingredients into smaller pieces (1-2cm) for easier grinding.
3. Place the ingredients in a bottle (7), then close the bottle with a ring (6).
4. After ensuring that all parts of the blender bottle are properly assembled, place the blender
bottle (7) into the bottle mounting slot (9), then turn it gently clockwise to lock the bottle and
start the machine.
5. Mount the battery (1) in the mounting slot (2).
6. Blend the contents of the bottle by pressing the on/off button (5). Pressing the button (5)
again during operation will stop the device.
7. The contents of the bottle can also be blended using the Pulse function button (4). Press and
hold the “P” button to get started. When the Pulse button (4) is released, the device will stop.
CAUTION! The maximum continuous operation time of the device is 1 minute. After this
time, turn off the device and wait at least 1 minute until it cools down.
CLEANING AND MAINTENANCE
CAUTION! The blades’ cutting edges are sharp Risk of possible injury! They should be
handled with care!
1. Before cleaning, remove the battery (1) from the mounting socket (2).
Bekijk gratis de handleiding van MPM CMBL-02, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MPM |
| Model | CMBL-02 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 14232 MB |
